| After-sales Service: | No Aftermarket |
|---|---|
| Warranty: | No Warranty |
| Type: | Inner Tube |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mining tires KT699 pattern is suitable for low-speed, generally poor road conditions, short distance mining gravel stone and cement mixing special vehicles
Short-distance mining tires, wear-resistant, puncture-resistant with excellent drive, traction performance, unique tread formula, while using 4 + 2 super-strong subcorner structure, with excellent load-carrying capacity, suitable for taking into account the pit inside and outside the harsh and very harsh road surface, the distance of transport within 50 kilometers of high load-bearing vehicles inside and outside the mine.
| size | ply rating(pr) | pattern depth (mm) | section width (mm) |
| 12.00R20 reinforced | 20 | 25 | 315 |
| 11.00R20 | 18 | 24 | 293 |
Guangzhou Yuanhong Tire Co., Ltd. was established in September 2010, thecompany is located in the beautifulscenery, pleasant climate of the hotspring capital- Guangzhou Conghuafrom Guangzhou Baiyun airport, BeijingHong Kong and Macao express, theSouth logistics distribution center Taihetown only more than 20 minutes, thetransportation is very convenient,logistics in all directions. The companymainly sells auto rubber tires and autospare parts as its main business.we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices. We all welcome you to visit our warehouse, thank you!
• Q: How long do tires typically last?
• A: Tire life is affected by many factors, such as driving habits, road conditions, vehicle load, etc. Under normal circumstances, the mileage of the tire is about 40,000-60,000 kilometers, and the use time is about 3-5 years. However, if you often drive in bad road conditions or have a more aggressive driving style, the service life may be shortened.
• Q: How can I tell if a tire needs to be replaced?
• A: Mainly look at the wear mark. There is a wear indication mark in the tire pattern, the general height is 1.6 mm, when the tire pattern is worn to be flush with this mark, the tire should be replaced. In addition, if the tires appear bulging, cracks or serious rubber aging, they must also be replaced.
Second, tire performance related
• Q: What is the difference between different tire patterns?
• Answer: longitudinal pattern tire rolling resistance is small, good comfort, often used in cars; The transverse pattern tire has strong grip and wear resistance, which is common in engineering vehicles; Block pattern tires have excellent grip in off-road and complex road conditions, which is a good choice for SUV and off-road models; Single guide pattern tires have good drainage and handling, and are generally used for high-performance cars.
• Q: What is the use of the tire speed rating?
• A: The speed rating indicates the maximum speed the tire can withstand under specified conditions. For example, a tire with a speed class of H has a maximum safe speed of 210km/h. The speed of the vehicle should not exceed the speed grade of the tire, otherwise it will be a safety risk.
Third, tire maintenance related
• Q: How to properly maintain tires?
• A: To check the tire pressure regularly, the general car tire pressure is between 2.2-2.5 bar. Also pay attention to the cleaning of tires, to avoid oil, chemicals and other corrosion of tires. At the same time, when the vehicle is parked for a long time, try to choose the flat ground to avoid local pressure on the tire.
• Q: Is tyre transposition necessary?
• A: Absolutely necessary. Because of the different degrees of wear of the front and rear tires of the vehicle, regular transposition can make the tire wear more uniform and extend the service life of the tire, it is generally recommended to transposition once every 10,000 to 20,000 kilometers.
){kind=link}